skip for main

MICRON Corporation is the Medical Equipment Manufacturer.

TEL. +81-3-3726-0396

1-34-14 Higashiyukigaya,Ota-ku

Tokyo 145-0065, Japan



For use of dental manufacturers, repair companies, and laboratories, etc. Suitable for development, experiment, and product inspection of air-driven dental handpieces like turbines, motors, and air scalers.


Supply pressure and supply feed rate of air and water are easily adjustable.


Air pressure, water pressure, water flow volume are easily adjustable.

Provided with on-off switches for driving air, cooling water, chip air, and illumination light .

Frequency and revolution measurement.


Q-unit has a sensor for measuring frequency and revolution of dental handpieces.
Easily check whether the handpieces are working correctly.

Low and super low rpm measurement: precise actual rpm measurement.


Sensor B is to measure low and super low speed (1 to 5,000 rpm) revolution of handpieces like prophylaxis and surgical use.
Q-unit does not indicate an electrically transformed motor rotation, but measures the actual revolution and provides more accurate measurement.

Equipped with ISO 9168 Type C connector. Connectable to various handpieces.

Q-unit has a Type C handpiece connector conforming to the international standard ISO 9168.
The connector accepts various standardized handpieces like air turbines, air motors (plus contra angles), and air scalers.
The connector also attaches to handpiece manufacturer's original couplings.


MICRON Corporation

Overseas Division
TEL +81-3-3755-0396
FAX +81-3-5747-5396
1-34-14 Higashiyukigaya
Ota-ku Tokyo 145-0065,Japan
TEL +81-3-3726-0396
FAX +81-3-3726-5396